Javelin® J800i Retransfer Printer

4200,00 

Everything looks better with retransfer printing

Colours are vibrant. Images are crisp. Quality is second to none. ID cards printed on the Javelin J800i Card Printer do more than protect your organization — they reflect its pride. The Javelin J800i produces ID cards with the highest image quality available. By printing a reverse image on the underside of retransfer film, then fusing the film to the card surface, the Javelin J800i creates an image quality that looks more like a sharp glossy photo than an ordinary ID badge.

Everything looks better with retransfer printing

Colours are vibrant. Images are crisp. Quality is second to none. ID cards printed on the Javelin J800i Card Printer do more than protect your organization — they reflect its pride. The Javelin J800i produces ID cards with the highest image quality available. By printing a reverse image on the underside of retransfer film, then fusing the film to the card surface, the Javelin J800i creates an image quality that looks more like a sharp glossy photo than an ordinary ID badge.

Printing on film instead of directly on the card means that the uneven surface of technology cards doesn’t compromise image quality. The Javelin J800i can print up to the edge of smart chip contacts, and over the edge of the card.

 

Printer Specifications
Print Mode Single-side printing (option: dual-side printing)
Print Method Dye-Sublimation / Resin Thermal Transfer
Resolution 300 dots per inch (11.8 dots per mm) resolution, 16.7 million colours / 256 shades per pixel
Print speed Batch Mode:
• 26 seconds per card / 138 cards per hour (YMC with transfer)*
• 32 seconds per card / 113 cards per hour (YMCK with transfer)*
• 47 seconds per card / 77 cards per hour (YMCKK with transfer)*
• 37 seconds per card / 97 cards per hour (YMCK with transfer and dual-sided, simultaneous lamination)*
• 55 seconds per card / 65 cards per hour (YMCKK with transfer and dual-sided, simultaneous lamination)*
Ribbons • Full-colour, YMC*, 750 prints
• Full-colour with resin black, YMCK*, 500 prints
• Full-colour with two resin black panels, YMCKK*, 500 prints
• Full-colour with resin black and inhibitor panels YMCKI*, 500 prints
• Full-colour with resin black and heat seal panel for difficult-to-print
surfaces, YMCKH*, 500 prints
• Full-colour with fluorescing and resin black, YMCFK*, 500 prints
• Resin black, K, 3000 prints
Retransfer Film Options • Clear (1,500 prints) • Standard Holographic (500 prints) • Custom Holographic, special order (500 prints)
Overlaminate Options • Thermal Transfer Overlaminate, .25 mil thick, 500 prints
• CR-80 patch size laminates (1.0 mil thick)
All overlaminates available in clear, standard holographic design or custom holographic design. 0.6 mil laminates available (special order)
Single Wire USB 2.0
encoding options
• ISO Magnetic Stripe Encoding, dual high- and low-coercivity, Tracks 1, 2 and 3
• Contactless Smart Card Encoder (iCLASS and MIFARE)
• Contact Smart Card Encoder reads from and writes to all ISO7816-1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards
Warranty • Printer – Two years
• Printhead – Lifetime; unlimited pass
Printer interfaces USB 2.0; internal USB hub to connect peripheral devices; built-in Ethernet (10/100Mps) RS232 network
Software drivers Windows® 2000 / XP / Server 2003 / Vista (32 & 64 bit) / 7 (32 & 64 bit); Mac OS X v10.4 / v10.5; and Linux****
System Requirements x86 based PC or compatible, Windows 2000, Windows XP, Windows 2003, Windows Vista or Windows 7, 500MHz computer with 256MB of
RAM or higher, 500MB free hard disk space or higher
Card capacity Input hopper: 100 cards (.030” / .762mm); Output stacker: 200 cards (.030” / .762mm)
Dimensions • 11.50”H x 12.25”W x 9.25”D / 292mmH x 313mmW x 235mmD (excluding Dual Side and Lamination Modules)
Weight • 16 lbs. / 7.3 kg. (excluding Dual Side and Lamination Modules)
Power source Input: 100V – 240V, 50/60Hz
Memory RAM: 16MB
Environment Operating temperature: 65° to 90° F / 18° to 32° C, 20 – 90% RH (non-condensing)
Agency Listings • Safety: UL 60950, CSA C2.2 No 60950, CB report (EN 60950), and CE mark
• EMC: FCC Part15 Class A, EN 55022: 1998 Class A, CRC c1374, EN 61000-3-2: 2000,EN 61000-3-2: 1995, EN 55024: 1998, CE mark,
and CCC mark
Card Specifications
Types ABS, Laminated PVC, PET, PETG, proximity, smart and mag stripe cards, optical memory cards
Note: ABS and PVC cards are not recommended for use in the Lamination Module.***
Maximum print area Over-the-edge on CR-80 cards
Card width/length CR-80 (3.370”L x 2.125”W / 85.6mmL x 54mmW)
Card thickness • Print only: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
• Print/Lamination: .030” (30 mil) to .050” (50 mil) / .762mm to 1.27mm
Card Cleaning Replaceable cleaning roller (included with each print ribbon)
Options • Card Lamination Module – single-sided or dual-sided (simultaneous)*** • Magnetic stripe encoding • 200-card input hopper
• Smart card encoding (contact/contactless) • Dual-sided printing • Door and cartridge locks • Printer cleaning kit
• Secure Proprietary Consumables System • Custom Secure Holographic Retransfer Film and Overlaminate